Dynamic RF Engineer with 13 years of extensive multi-vendor experience on various technologies such as CDMA, UMTS, LTE, VOLTE, CBRS, and NR. In-depth knowledge and understanding of designing, planning, and optimization activities to bring life to a broad variety of RF networks as per customer specifications. An inventive mind is driven to excellence through collaboration and high-powered problem-solving.
Overview
13
13
years of professional experience
Work History
RFIII Planning Optimization Engineer
Fieldforce / GTA-Kelly Telecom
05.2021 - Current
Optimize major KPIs of LTE & 5G Layer of new Rollout Sites for acceptance.
Work on major KPIs, RRC SR, ERAB SR, SDR, HOSR, CSFB SR, MIMO RANK-2, DL User Throughput, CA, MLB, VOLTE & IRAT to improve user experience.
Work on Coverage and SINR Optimization of Site/Cluster to provide the best user experience.
Analyzing the LTE/VoLTE/5G project Monitoring and Optimizing the LTE, VoLTE, and 5G sites.
Coordinating with project teams for verifications of the feature trials and verifying the logs collected.
Troubleshooting LTE failure types and propose appropriate solutions including parameter & antenna configuration optimization.
Pre and Post drive logs Analysis for different feature trials like Massive MIMO launch, proposing No CA to 3CA throughput and Handovers comparison, and Different Device Support Layer throughput.
Running daily KPI performance reports and identifying top offenders with performance degradation issues.
Deep experience in throughput issues, QCI1 drops, SIP messaging Failures, handover failures, coverage, and quality bottlenecks.
Running end-to-end voice call traces for troubleshooting/analysis of the major network issues.
Doing parameter audits for the worst performing sites and recommending parameter changes troubleshooting capacity bottlenecks in the network and recommending capacity changes and capacity upgrades accordingly.
Parameter tuning through MML Commands/Scripts, Signal Tracing & CHR Logs Analysis for Intra & Inter Frequency Handover Optimization
Worst Cell Optimization for Top worst Cells include RRC SSR, ERAB SSR, ERAB Drop Rate, Handover Control, Capacity Management
Analyzing log files for VoLTE Block Calls, Drop Calls, RSRP, SINR, MOS, Speech Codec, Call Setup Time, Call Setup Failures (due to MTC TAC change, MOC/MTC UE out of Synch), SRVCC Handover Failures, Confidential Failures, Speeding Up SRVCC.
InterRATA2RSRPtriggerthreshold for better SRVCC based upon RSRP triggered event A2, InterRATA2RSRQtriggerthreshold for better SRVCC based upon RSRQ triggered event A2, UTRANB2RSRPThreshold for better SRVCC based upon RSRP triggered event B2 UTRANB2RSRQThreshold for better SRVCC based upon RSRQ triggered event B2
5G network integration and optimization.
Antenna selection based on current tower top configuration.
Create super-clusters in ATOLL.
Run Baseline predictions and export KPIs.
LTE and VoLTE KPIs Monitoring and Optimization (Avg MIMO usage,PUCCH RSSI, PUSCH RSSI, VoLTE RACH Setup Completion Success Rate,VoLTE Inter eNB X2 HO Success Ratio, VoLTE Intra eNB HO Success Ratio,VoLTE RRC Setup Success rate,ERAB Drop Rate,Rate,UL/DL Traffic Volume,UL/Downlink Throughout, CSFB KPI’s).
Upload pre-defined hot spots and calculate path loss.
Use ACP to optimize tilts - Verify ACP configuration, which sometimes requires manual optimization as well.
Run optimized predictions and export KPIs.
Re-evaluate antennas based on RAN forecast and prepare ATOLL database for RFDS creation.
Update ATOLL with scoping feedback and update design if required.
Review the EME mitigation reports and recommend onsite studies to make sure the EME measurements are as per agreed standards.
RFIII Planning Optimization Engineer - Team Lead
RSC, Huawei Technologies
08.2019 - 04.2021
Bahrain STC - 4G/5G RNO Engineer RFIII / Team Lead
Lead the team of SSV and DTA.
Performed risk and vulnerability assessments and provided results and recommendations to senior management.
Cell level Optimization of 2G/3G/LTE and VoLTE sites( L 800/1800/2100/2600 Layers
Assessed problem severity to determine corrective action, recommending resolutions to technical problems through fault isolation techniques.
Responsible for achieving the SLA set for ATP testing.
Managed the overall daily/weekly/monthly project tracking, i.e., resource allocation, work assignments, and team planning.
Managed 5G SSV optimization delivery.
Optimize major KPIs of LTE Layer TDD 3.5GHz & 5G Layer 3.5GHz & 2.1GHz of new Rollout Sites for PAC Acceptance.
Work on major KPIs, RRC SR, ERAB SR, SDR, HOSR, CSFB SR, MIMO RANK-2, DL User Throughput, CA, MLB,
VOLTE & IRAT to improve user experience.
Work on Coverage and SINR Optimization of Site/Cluster to provide the best user experience.
Work on U2020 for executing Huawei RF Parameters through MML Commands/Scripts, Signal Tracing & CHR Logs Analysis for Intra & Inter Frequency Handover Optimization
Performed necessary action to achieve the 5G ATP results. Optimized CSFB. IRAT Parameters
Optimized SRVCC for the smooth transition between CS and PS networks. Perform Huawei LTE Parametric & Neighbor Audit using FMA & OMStar.
Performed LTE, VoLTE, SRVCC, VoNR, and 5G KPI optimization to achieve the agreed SLA. Such as:
RRC Connection Success Rate, Erab Establishment Success Rate, Erab Drop Rate, Downlink & Uplink User/Cell Throughput for Enhanced Quality of Service, SRVCC SR, VoLTE Drops, Volte CSSR, and CSFB.
Interface with the front-line teams and customers.
RFIII 4G/5G RNO Engineer / Team Lead
Iraq Asia Cell
Turnkey project - Lead the team of SSVs and DTAs
Worked closely with the stakeholders, and interfaced with the front-line teams and customers.
Trained new team members by relaying information on company procedures and safety requirements.
Coached team members in techniques necessary to complete job tasks.
Led product testing, failure investigations, and corrective action planning.
Created and strengthened testing procedures to enhance quality controls.
Oversaw the complete life cycle of design, from initial concepts through production support.
Analyzed electronics system requirements, capacity, or customer needs to determine project feasibility.
Skilled at working independently and collaboratively in a team environment.
Self-motivated, with a strong sense of personal responsibility.
Proven ability to learn quickly and adapt to new situations.
Managed the overall daily/weekly/monthly project tracking, i.e., resource allocation, work assignments, and team planning
Optimize major KPIs of LTE Layers (FDD_800, FDD_2100 & TDD_2600) of new Rollout Sites for PAC Acceptance
Making sure to achieve the agreed SLAs
Performed worst-cell optimization for the Accessibility, retainability, mobility throughput, and Usage KPIs
Performed different network audits and parameter optimization to improve KPIs, i.e., PCI conflict/confusion, Mod- 3 clashes, Neighbor audits -tier 2/tier3 neighbor, CA, load balancing, intra/inter freq, and ANR
Worked on massive-MIMO sites and performed parametric tuning and optimization
Performed KPI benchmark
Handled cluster optimization
Optimized CSFB; IRAT Parameters.
Perform Physical Redesigns using RET to improve coverage/quality/multi-server environment Work on LTE Features like ANR (Addition/Deletion), CA, MLB, PCI Collision & Confusion, etc Optimized HO parameters with CIO offset, Events, and timer tuning
Addressed congestion issues, i.e., Power, Code, CE, IUB, and proposed expansion/actions to eliminate congestion
Performed LTE multi-layering strategy settings
Performed sector split, beam forming, and multi-beam forming Carried out CA optimization exercise
Performed load balancing for the optimal user experience
Performed Layer 3 analysis for critical cases
RF Parameters tuning through MML Commands/Scripts, Signal Tracing & CHR Logs Analysis for Intra & Inter Frequency Handover Optimization
Alarm troubleshooting and rectification
Responsible for the successful SSV deliveries
Managed time efficiently to complete all tasks within deadlines.
RFIII 4G RNO Engineer / Team Lead
Saudi Mobily
Key Responsibilities:
Manage the teams of SSVs and DTAs
Optimize major KPIs of LTE/Volte
Work on LTE Throughput, CSFB, Intra & Inter Frequency Handovers, Carrier Aggregation, VOLTE, Inter-Layer Handovers.4
PCI/PSC/BCCH Clash Removal to enhance Multi-Layer Handovers & Traffic Balancing
Perform Parametric & Neighbor Audits to remove discrepancies
Perform Physical Redesigns using RET to improve coverage/quality/multi-server environment Use TEMS Discovery to analyze Logs for Coverage/Quality Improvement
Layer 3 analysis
Responsible for successful SSV deliveries
Interface with the front-line teams and customers
Interface with the front-line teams and customers.
Balanced demand for low loss, high linearity, reliability and thermal performance in new technology designs.
RFIII 4G RNO Engineer
Saudi Zain
Performed 4G optimization activities
Make sure to meet the ATP as per customers' agreed SLAs
Optimized issues like coverage holes, Call drops, HO issues, voice, bad SINR, and Pilot Pollution
Optimized low throughput issues
Perform CA optimization
Perform parametric tuning and network audits
Optimize major KPIs of 2G/3G/LTE on both SSV and cluster level
Created and strengthened testing procedures to enhance quality controls.
Optimization & Monitoring of major LTE KPIs including RRC Success Rate, ERAB Success Rate, ERAB Drop Rate, CSFB, DL Throughput, Intra & Inter Frequency HOSR & S1/X2 Signaling
Senior RFIII RNPO Consultant
Clusterous
07.2018 - 07.2019
Responsible for planning & optimization activities such as HBA, Cluster optimization, Single site optimization, Post Processing, and Sector Split
KPI analysis, i.e., Accessibility, Retainability, Mobility, call drop analysis, ho analysis, new site deployment pre/post-launch, team management, implementation management, Tech presentation, detailed engineering design, review SSV, SOR, TSSR, BOQ, LOM
Post Processing of the drive logs when required and providing real-time recommendations
Performed split, beam forming, and multi-beam forming
Performed root cause analysis of KPIs degradation, i.e., RRC SR, ERAB SR, SDR, CSFB SR, MIMO, Intra & Inter Frequency Handovers, Carrier Aggregation (CA), MLB, VOLTE, IRAT, CSFB, and SRVCC Technical Support and coordination with both in-house and field teams
Resolved coverage and SINR-based issues on both the site and cluster levels
Supported with indoor design/schematics reviews and rectifications
Splitters, couplers, tappers, RRU, combiner, etc.
Alarm troubleshooting and clearing, root cause analysis of KPIs degradation, parameter study, and modifications Monitoring of assigned LTE Clusters/City & Optimize the major LTE KPIs RRC Success Rate, ERAB Success Rate, ERAB Drop Rate, CSFB, DL Throughput, HHO & S1/X2 Signaling, etc.
Analyze the DT Logs in TEMS Discovery to improve LTE Coverage and Throughput
Attend Customer meetings as RF Team Lead to discuss RF issues regarding NPM Network, New sites, and Expansions Coordinate with team members to achieve their daily/weekly targets & major 2G KPIs (CSSR, CDR, HSR, RQI, and RLC Throughput and LAC Planning
Coordinate with team for 3G KPIs improvements like improving the RRC Connection & RAB Establishment Success rate, Soft Handover, Inter Frequency HO (Dual Carrier), IRAT Handover, Location Update, Paging, HSUPA & HSDPA for all Voice, Video Packet & High Speed, issuing capacity requests
Perform Parameter audit to remove discrepancies and set parameters to optimize values for Network KPIs Improvement
Analyze DT Logs of High Priority Areas, Customer Premises and recommended Physical/Parametric changes for Coverage and Quality Improvement
Post Optimization of assigned LTE Clusters by tuning Radio Parameters and physical changes Interface with the front-line team and customer.
Managed and motivated employees to be productive and engaged in work.
Accomplished multiple tasks within established timeframes.
Cross-trained existing employees to maximize team agility and performance.
Maximized performance by monitoring daily activities and mentoring team members.
Onboarded new employees with training and new hire documentation.
Responsible for planning, designing, and optimizing the outdoor and indoor TETRA/LTE private site
Performed TSSR with the client for the site allocation
Performed dummy tests for the successful delivery of private LTE site
Perform network monitoring and audit to solve network-related discrepancies
Perform KPI optimization to solve HO issues, Call drop issues, and frequency clashes
Designed complete site from scratch to end, i.e., Site survey, coverage heat map, design, frequency allocation, NBR planning, LOS, equipment type, count of site, and quotation
Making sure the network is having correct parameters and all the frequencies are planned as per network needs
Perform an audit to remove PCI clash/confusion
Worked on multiple programs, i.e., Airports, metros, Tunnels, Oil rigs, security agencies, and military
Provided solutions to everyone as per their need
Performed network audits before and after the site deployment for precise network planning
Provided recommendations in case of any discrepancies in the network
Design IBS/Outdoor sites and simulate to know the approximate footprint of the site
Responsible for the RFP, RFQ, LOM, and BOQ
Major Clients: Military, Oil & Gas, Metro rail
Major Projects: AUH Airport, Morocco Airport, Oil-Rigs station offshore.
Met with clients to discuss assets, expenses, and long-term and short-term investment goals to devise personalized financial plans.
Established and deepened existing client relationships through complex financial planning.
Drafted a comprehensive financial plan to offer recommendations and supporting data.
Answered clients' questions about the purposes and details of plans and strategies.
RFII Planning Optimization Consultant / Team Lead
Aircom International, Etisalat
01.2015 - 12.2017
Handled NPM-MS project, and worked closely with the line manager in different planning optimization activities for both indoor and outdoor sites
Hands-on experience with the LTE; VoLTE planning, design, and optimization of outdoor and IBS sites
Optimized VoLTE KPIs like packet delay, DL average VQI, VoLTE traffic, VoLTE CSSR/DCR, Intra-Inter freq HOSR and Volte MOC CSS
Performed worst cell optimization and optimized RRC SSR, ERAB SSR, ERAB Drop Rate, Handover Control, and Capacity Management
Performed throughput enhancement via multi-frequency carrier scheduling and inter-layer strategy b/w layers
Perform Cell Frequency, SC, and PCI audits to remove any discrepancies and to improve Radio Environment by improving C/I, Ec/No, SINR, RSRP, and RSRQ
Perform DT Logs Analysis of 3G and 4G to resolve coverage-related issues
Analyze worse cells daily and escalate HW issues & Alarms
Used WNCS for neighbor additions/deletions audit and pm propagation delay to detect overshooting cells
Performed different audits and ensured the network settings met the customer-provided baseline parameters
Implemented necessary real-time physical redesigns to solve voice and data-related issues
Performed SON tuning, i.e., ANR, X2, PCI, HO, and power control
Monitor all LTE, VoLTE, VoNR, SRVCC, and Massive MIMO hourly and Daily KPIs
Performed frequency and neighbor audits and provided recommendations to solve the discrepancies
Optimized small cell sites and analyzed the OSS KPIs
Involved in the network event planning, i.e., New Year, Concerts, Public events, and VVIP gatherings to ensure uninterrupted data and voice
Preparing benchmarking reports for RSCP, EcNo and HS/EUL Throughput and based on the drive test logs on the cluster level
Attend Customer meetings to discuss issues related to the new sites Frequency Plan, KPIs Optimization, and TRX Expansion Plans
Handled VIP complaints and took real-time actions to solve the issues
Performed passive/active IBS designs/redesign using IBWave for solo/merged networks
Review the tapping design/diagram and provide recommendations
Interface with the customer
Live Monitoring the Special Events using traffic and doing parameter changes using NetAct
RFII Planning Optimization Consultant / Team Lead
Tawasol Solution, Etisalat
02.2013 - 12.2014
Led the team of customer complaint RNOs responsible for the VVIP complaints related to 3G/LTE
Solution provider for the VVIP and everyday category customer complaints about the 2G/3G/LTE technologies
Designed real-time solutions like FEMTO cells, small cells, PICO repeaters, and sector additions to solve the VVIP complaints
Performed site surveys for the critical sites, i.e., high-rise buildings, lift coverage issues, basement issues, issues related to drop calls, and HO issues at the city borders and the entrance and exits of the parking area in the basements
Performed network monitoring of the VVIP sites for the significant 3G/LTE KPIs and took necessary action to solve the issues
Optimized the DCR, ERAB, RRC, CSSR, and HOSR
Alarm troubleshooting and clearing
Traffic balancing Between Carriers
Meeting with customers to solve their network-related issues
Responsible for VIP customer satisfaction and approvals
Responsible for the customer complaint team management, resource utilization, task allocation, and daily, weekly monthly reports
Make sure of timely delivery of the tasks as per agreed SLAs
Interface with the customer.
RF Engineer / Field Coordinator
UCE International
01.2011 - 01.2013
Responsible for the drive test activities over the 2G site
Responsible for the task assigned to the DT team and ensuring all designated sites are delivered on time with a complete task list
Performed the functionality test for the site and worked with RNO to solve the issue in real-time
Provided physical recommendations from the field to solve problems related to voice and data
Analysing Drive test logs using TEMS Investigation
Troubleshooting the 2G Worst Cells with drops due to UL SS, DL SS, Both link SS, UL Quality, DL Quality, and 3G Worst Cells with drops due to Uplink synchronization
Provided real-time field optimization support to the RNO to solve coverage holes, drop calls, and HO issues
Make sure to cover all the possible routes for the DT
Performed DT for clusters and recommended optimizing the cluster with the help of possible physical changes on specific sites
Escalate zero traffic cells, low efficient TRXs/faulty Hardware, BSS Transmission drops, UL Interference & TCH Fluctuation to concerned departments
Perform indoor sites DT (walk test) on VIP Places to check & improve coverage &quality
Post Processing & Analysis of Log Files, Making Drive Test Reports with Problem Identification and Recommendations & benchmarking the result after changes
Monitor & improve the KPIs of assigned BSCs/Clusters and work on daily worse cells Responsible for achieving all the required field tests without error
Prepared site reports
Performed technical site survey and arranged the reports for the site allocation
Involved in resolving the sector swap, down TRXs, alarm clearance, and Power Issues
Identified frequency and BCCH conflicts and provided on-field support for the resolution and clearance.
Education
Bachelor of Science - Electrical Engineering (BSEE)